9008620582 info@probots.co.in

Probots Blog

Force Sensors Buying Guide

Force Sensors Buying Guide

In this article, I will give you an idea of how to buy the right force sensor for your Applications. What are Force Sensors?? Force sensors are devices that are designed to translate applied mechanical forces, such as tensile and compressive forces, into output...

ESP32 Buying Guide

ESP32 Buying Guide

In this article, we’re going to compare several ESP32 development boards. The aim of this article is to help you choose the best ESP32 development board for your project requirements. The ESP32 is the ESP8266 successor. The ESP32 is loaded with lots of new features....

AIR QUALITY SENSOR CCS811

AIR QUALITY SENSOR CCS811

In this article, we are going to look at a peculiar sensor called the Air Quality Sensor aka Air pollution sensor CCS811. We will touch through the introduction on air quality sensors and related topics such as what are the pollutants and how it is measured etc. and...

Barometric Pressure Sensor Guide

Barometric Pressure Sensor Guide

I got a chance to work with a module that is capable of measuring a range of pressures!  The testing is centered around a small and inexpensive pressure sensor module called a “Barometric Pressure Sensor ”. All the modules that you require to implement this...

Microwave Radar Sensor HFS – DC06

Microwave Radar Sensor HFS – DC06

Today in this article we are going to work with a sensor in the Microwave Radar Sensor series.  The HFS-DC06 is a Microwave Radar Sensor that is designed for movement detection, like intruder alarms, occupancy modules, home automation, sea ice monitoring,...

Microwave Radar Motion Sensor (HW-MS03)

Microwave Radar Motion Sensor (HW-MS03)

A few months back I took a look at some low-cost passive infrared (PIR) motion sensor modules. Since I am fond of sensors,  I did a few sensor research and found out about Microwave radar sensors. Luckily, I found this interesting sensor in our new arrival lists,...

Programming a Custom nRF52 Beacon using nRF52 DK

Programming a Custom nRF52 Beacon using nRF52 DK

The nRF52 DK board is excellent for testing and getting products with the nRF52 IC ready. It has an onboard nRF52 BLE IC which can be programmed as a beacon. It can also act as a programmer and be used to program an external nRF52 beacon. This is very helpful as...

How to design Snap-fit for 3D Printing Enclosures Part 1

How to design Snap-fit for 3D Printing Enclosures Part 1

So in this article there are three parts, which will give you a detail concept on snap-fits. Snap-fit joints are a quick and easy way of connecting two 3D printed components together using interlocking features.snap-fit is an assembly method used to attach flexible...