February 2021

What is an Electromagnet???? An electromagnet is a type of magnet in which the magnetic field is produced by an electric current. The magnetic field disappears when the current is turned off. The electromagnet is simply a large coil of wire wrapped around a piece of iron. Applications: (Pick-and-place systems)- This type of electromagnets are […]

Build direction: A snap fit built in the direction shown above will be much stronger. It’s important to consider building direction. If possible, try to avoid designing snap-fit cantilevers that are built up from the bed vertically (in the z direction) as these are inherently weaker due to the anisotropic nature of 3D printing. Add

Annular snap-fits The annular snap-fit utilizes hoop-strain to hold a pressed part in place. Common examples of annular snap-fits are bottle and pen caps. With annular snap-fits, it is possible to achieve a waterproof seal around the joint.For the rest of this article, the focus will be on cantilever snap-fits. In this joint the strength

So in this article there are three parts, which will give you a detail concept on snap-fits. Snap-fit joints are a quick and easy way of connecting two 3D printed components together using interlocking features. snap-fit is an assembly method used to attach flexible parts, usually plastic, to form the final product by pushing the

Modbus is a data communication protocol originally published by Modicon (now  Schneider Electric) in 1979 for use with its programmable logic controllers(PLCs). Modbus has become a de facto standard communication protocol and is now a commonly available means of connecting industrial electronic devices for data transmission. An important point to pay attention to is that